Tips on How to Make A Pool Vacuum Using A Garden Hose

A pool in the residential space is downright a luxury only a few can afford. Also, it helps keep you fit through regular swimming. However, when a pool gets dirty, you would want to clean it, and nothing can perform the pool cleaning better than a DIY garden hose pool vacuum.

And so, today, we are profoundly going to discuss how to make a pool vacuum using a garden hose. We will discuss the effective tools required for the process and steps on connecting all these tools for a fair pool vacuuming process.

Furthermore, we will discuss how to clean an above-ground and Intex pool with or without a pump and pool vacuum.

So, are you ready?

How to Make A Pool Vacuum Using A Garden Hose

Before you can start making a pool vacuum using a garden hose, you will need to know the tools necessary for manufacturing. So, let’s dive deep into the tools sections first.

A Garden hose:

To begin with, you will require a good-quality garden hose. You may use a new or old hose for the purpose, but make sure it covers the entire length of the pool from top to bottom. Hence, we recommend you use a garden hose at least 25 feet in size.

Also, the hose should have no-kink and tangle-free movement to ensure a free flow of water through it without further issues.

A telescopic pole:

It varies in length. The primary purpose of the telescopic pool is to accumulate debris from the pool water and collect it in an attached bag. You can then remove the waste in the preferred place.

Vacuum bag:

When you use a garden hose to vacuum a pool, the debris might float back into the pool water unless you have an adequate suction capacity for the garden hose. Hence, we suggest you use a vacuum bag. It acts as a suction pressure supplier for the vacuuming tool.

It supplies the required suction pressure, which holds on to the debris and prevents it from going to the pool water again. It is a vital part of your manual pool vacuum procedure.

Plastic funnel:

The small outer diameter of the garden hose limits its capacity to collect much debris at the moment. It will ultimately slow down the pool cleaning process.

So, we suggest you to use a plastic funnel to enlarge the hose mouth. You can use a 500 ml drinking water bottle for the purpose. Just cut the bottle at a 45° angle and use it as a funnel.

Note: If you have made your mind to search for the products mentioned above, let us make your decision a bit easier. Here’s the top list of related products suggested by Experts. (The first one is most preferred)

Check On Amazon
Amazon Basics Vacuum Compression Storage Bags with Hand Pump
  • Set of heavy-duty plastic vacuum compression storage bags
  • Protects items from moisture, dirt, odors, and more
  • Heavy-duty valve and double seal zipper for air tight protection
Check On Amazon
EVERSPROUT 5-to-12 Foot Telescopic Extension Pole
  • Made with Rust-Resistant Anodized Aluminum
  • 3-Stage Telescopic Extension
  • Item Weight 1.5 Pounds
Check On Amazon
Norpro Plastic Funnel
  • A simple, yet helpful tool for transferring liquids/dry ingredients from containers to bottles while keeping the kitchen counter free from spills.
  • Made with Plastic
Check On Amazon

Steps to Follow to Make the Garden Hose Pool Vacuum

Now that you have a thorough idea of the four necessary tools to create a pool vacuum using a garden hose let’s see how to connect the devices. The process includes:

Step 1: Attach the vacuum bag

When you have picked the right garden hose for the purpose, at first, pick one end of the tubing and attach the vacuum bag with it. It would help if you connected the vacuum bag correctly.

Observe both ends of the gardening tube, and identify which end has a valve attached to it. Connect the vacuum bag with the valve end to create the right suction pressure.

Step 2: Securely connect the telescopic pole

Firstly, find the handle of the leaf skimmer and remove the hold of the telescopic pole from the leaf skimmer. Then attach the stick with your garden hose.

When it comes to effectively removing the handle from the telescopic leaf skimmer, you usually get two methods for it. These are:

  • If the handle has a two pins attachment, apply pressure to disorganize the pins attached to remove the handle.
  • In the most standard cases, you can disorganize the skimmer and the pole only by twisting the leaf skimmer portion.

Once you have removed the leaf skimmer from the telescopic pole, you need to identify the vacuum pool hole in the garden hose. Then attach the telescopic pole with the lately found hole. Sometimes you find it challenging to connect the garden hose and telescopic pole.

If such is the case, we recommend you use a knot and tie both tools.

Vacuuming the Pool Using A Garden Hose

Once you are ready with your homemade pool vacuum using the garden hose, you can quickly use it to drain the pool water. It is crucial to maintain the pool water with optimal pH and chlorine levels. The process is performed without the use of a pump.

Hence, sometimes you will find the process tilted as ‘how to vacuum a pool without a pump.’ The steps will include:

  1. You need to enter the garden hose into the pool water first. For this, start by lowering the tube into the water using the telescopic pole. Move the pole slowly to ensure that the garden hose reaches the bottom of your pool.
  2. It is crucial to reach the bottommost portion of the pool water. Thus, you can quickly vacuum the pool to get rid of all debris and other harmful materials.
  3. Before you start the siphoning with the garden hose, fix where you want the drained pool water to go. Once you have directed the other side of your garden hose to the desired draining position, it’s time to start the pool vacuuming process.
  4. You can siphon the garden hose by placing one hand at its front. It will create a vacuum inside, and once you place the tube underneath the water, the emptiness inside will draw pool water and debris through it.
  5. When you have successfully created the suction pressure with the siphon technique and placed the garden tubing right underneath he pool water, use the telescopic pole to move the hose slowly.
  6. As you move the garden hose, it will scan every inch of the pool and collect debris from vacuuming the pool
  7. You should repeat the garden hose vacuum procedure multiple times to entirely clean the water and get a healthy pool.
  8. Once you are done, slowly remove the hose from the pool water and disorganize the attached telescopic pole with it.
  9. Finally, clean the hose and pole and store them securely for further use in the future.

Usually, you can make a homemade pool vacuum and clean the pool water with our tips mentioned above at ease. Also, it is a cheaper alternative compared to the use of a pump.

How to Clean the Bottom of a Pool Without A Vacuum

If you dislike using a pool vacuum to clean the pool bottom, alternatively, you may use a pump for the process.  The use of a pump is the most efficient and fastest way to clean the pool bottom and remove all possible debris with ease.

The process follows:

Step 1: Fix Where you want to drain

First, locate where you would want to drain the pool water. Some municipalities will ask you to drain pool water in a specific location. So, be aware of your municipal authorities if you want to drain the water outside of the home.

We recommend you to vacuum the pool water in the gutter.

Step 2: Putting the pump hose in the pool

Now, unroll the attached hose with the pump. Make sure it reaches the bottommost part of the pool water so you can quickly drain each drop of water and clean the pool.

Step 3: Vacuuming the pool pump hose

When you don’t use the pump hose for a long time, air will occupy inside the hose and reduce the suction efficiency created by the pump. So, it would be best if you primed the hose before starting the pump. You may put a hand in the opening end and then hold it for a few moments before releasing it.

This way, push the hose towards the water and then release your hand. When you remove hands from the tube opener, you will see air bubbles on it. The air bubbles are the relieving air from the tube inside.

Step 4: Turn on the pump

When you are set with the primed hose, it is time to start the submersible pump for the cleaning procedure. Make sure ardently your hands are dry before you press the starting button for the pump. It is vital since you will be working with electricity.

Step 5: Drain and clean the pool

Once the pump entirely drains the pool, you can manually clean the pool bottom. You may use a set of scrubber for the process. Use the scrubber to rub off the algae and other debris from the bottom and walls.

This way, you can quickly clean the bottom of the pool.

Intex Pool Vacuum Process Without an Adapter

Intex is a famous brand for home pools and is available in various sizes and shapes. You can vacuum the Intex pool with the following tips:

  • Usually, Intex pools have a valve attaché with its outside portion. Once you have found it, connect the garden hose female end with the valve. Then you will effectively require to secure the garden hose male end with the water sprinkler.
  • After attaché, the female end of the tube with the valve, slowly start the Intex pool vacuum

It works against gravity, and so, usually, it is a slow procedure. So, be patient as it goes along.


If you want to clean the pool water easily and affordably, knowing how to make a pool vacuum using a garden hose is a must-have for you. You can use the garden hose attached with the telescopic pole to vacuum the pool.

Also, for pool vacuuming, you can choose a submersible pump. However, the submersible pump is an expensive alternative. So, my suggestion is to use the garden hose to vacuum pool with the most manageable steps.

So, I hope it comes helpful to you.