The Easiest Way on How to Get Algae Out of Pool Without A Vacuum

A pool is a great way to relax after a long tiring day and spend quality time with family members during the weekends. However, if a pool isn’t cleaned correctly, it can get dirty sooner and can be detrimental to human health. And getting caught with algae is one of the most common problems of a pool- both above-ground and in-ground.

So, you would be interested to know how to get algae out of the pool without a vacuum since sometimes using a vacuum cleaner can be challenging. Algae invasion in the pool makes it dirty and unhygienic, and so you should immediately get rid of it.

Additionally, it would ardently help if you kept the pool neat and clean to prevent algae invasion in the pool. So, you should also know the techniques for vacuuming above ground pool.

And we will cover all these topics in today’s tutorial.

How to Get Algae Out of Pool Without A Vacuum

Algae invasion in a pool can be dangerous. First off, it makes the water unhygienic, and secondly, it ruins the beauty of the pool. However, when it comes to vacuum a pool to remove algae, you should know the signs of algae and fungal attack in the pool.

Signs of Algae Attack in The Pool:

Technically speaking, algae float in the tank water almost always, whether or not you observe it. Sometimes, it remains in such a small amount that it gets invisible. However, things can become problematic when the algae spread quickly in the pool water and making it dirty.

There are two symptoms of algae invasion in a pool:

  • When algae presence is too much in the pool, you will notice a discoloration in the pool water. Also, the pool water will turn dull and murky with the presence of algae and other dirt particles.
  • You will see bluish to greenish color in the stairs and walls. Algae grow best around the pool wall and pump area.

When you notice these scenes, you should be itching to know, “How do I get algae off the bottom of my pool without a vacuum?” So, let’s start the journey to beat the algae attack in the pool.

Tips 1: Take care of the pool filter

If you have a filter in the pool, you are lucky. A filter goes a long way to remove most of the dirt from a pool and keep it clean. When you have a pool filter, things can get easier even without a pool vacuum. All you need to do is to clean the filter regularly.

Before you clean the filter, please turn it off and follow the manufacturer’s instructions to rinse off the pool filter. However, if the dirt is too much, you can use a garden hose as a siphon to remove all types of debris and dirt from the filter.

Once the filter is cleaned correctly, it will automatically lower the algae in the pool water.

Tips 2: Care the pool pump

Stagnant water is the most loving place for algae. They thrive mostly where there is no circulation of the water. So, you should make sure that the water keeps moving or circulate in the pool to stop the algae attack.

Using a pool pump is the best way to circulate the pool water without much effort. However, the pump itself may get clogged, sometimes causing water to get stagnant in the pool.

When it happens, then the chaos takes place, and algae start forming in the pool water. So, it would help if you tried to keep the pool pump clean always.

  • You can use a skimmer to clean the pool pump. A pool skimmer is specially engineered to draw water from the pool surface and then filter it using the filtration mechanism.
  • The pump strainer is another brilliant device to clean the pool pump. Once you can correctly use the strainer, it does a smarter job and cleans the pump in no time.

How to Get Algae Off Bottom of Pool

Even after you take proper care of the pool pump and filtration, algae can still grow in the water to ruin your hard work. So, you need to know how to remove algae out of the pool water. It includes both the surface and the bottom.

Method One: Use Algaecide

While you may think about using a vacuum cleaner, another smarter and quicker way to get rid of algae from the pool water is to use a potential algaecide. Although less known, algaecide is used to kill the algae quickly.

Many people use an algaecide to remove all types of germs and bacteria from the pool. However, we would recommend you to use specific algaecide for specific algae. It will bring fruitful results.

You can choose a particular type of algaecide for green, yellow, or blue algae. However, if you want to get the job done for all kinds of algae immediately, you can opt for the multipurpose algaecide.

Step 1:

You can choose a particular type of algaecide for green, yellow, or blue algae. However, if you want to get the job done for all kinds of algae immediately, you can opt for the multipurpose algaecide.

Step 2:

After waiting for a few minutes of turning on the pump, you need to apply algaecide in the pool. For every 10,000 gallons of water, you need to pour 16 ounces of algaecide in the pool.

Step 3:

Now, it is time to play the waiting game dedicatedly. You need to run the pool filter and wait for 12 hours to 24 hours so that all the algae are dead and removed from the pool water.

Method Two: Applying Shock Product

You may be wondering what a shock product to remove algae from the pool water is? Well, a popular shock product is calcium hypochlorite. It is seen widely in the market and is used to clean the pool and other substances.

However, we warn you to touch the calcium hypochlorite with a bare hand since it can damage your tissues. So, we suggest you wear a pair of hand gloves before working with the shock product. Also, wear ardently a pair of safety goggles to protect your eyesight from any accidental spillage.

Step 1:

In the beginning, wear protective goggles and hand gloves to ensure safety. It is essential since calcium hypochlorite is very reactive and can burn your soft tissues.

Step 2:

Pick a clean bucket that can accommodate at least five gallons of water. Then fill it up with tap water. You should ardently ensure that the water is clean.

Step 3:

Add one pound of the calcium hypochlorite shock product in the bucket. You may need to use 15 gallons to 20 gallons of water and 3 pounds to 4 pounds of shock product depending on the pool size. After you have poured the shock product in the bucket, use a stick to stir the mixture.

Keep string until the mixture is adequately diluted.

Step 4:

Now pour the mixture directly in the algae affected area of the pool. In most cases, one dose of shock product application is enough to kill most algae. However, if the algae attack is too high, you may require using calcium hypochlorite twice.

Step 5:

We recommend you to apply the shock product at night so that it gets a whole night to work in the pool water. Once you use the product in the pool water, run the filter for at least six to eight hours. The calcium hypochlorite will release chlorine in the water and kill the algae.

Once the algae are dead, you can proceed to accumulate the dead algae and give the pool water a proper vacuum cleaning.

How to Remove Dead Algae from Pool Without A Vacuum

Sometimes, dead algae may get accumulated in the pool bottom. It would help if you cleaned the dead algae as soon as possible to keep the water neat and clean.

You can use a garden hose and telescopic pole to remove the dead algae. The garden hose works like a siphon to wipe out algae and other debris from the pool bottom.

Once you attached the telescopic pole with the garden hose end, connect the other end of the hose with a vacuuming port to remove the water. Also, attach a bag to collect the debris.

Then, apply the tube as a siphon to reach the bottom of the tank and remove the remaining algae and dirt from it.

How to Clean the Bottom of a Pool Without A Pump

While using a pump to clean the pool water is the best way, sometimes you may not have a pump for the purpose. So, what do you do then?

Well, you can still clean a pool bottom without using a pump. You will need the ardently following things for the pool cleaning purpose:

  • A garden hoses
  • Telescopic pole

Ideally, you may want to use a 25 feet garden hose so that it reaches the pool bottom adequately. Also, with a longer tube, you will easily place the other end in the right draining place.

The steps include-

Step 1:

Once you are ready with all the equipment to vacuum above ground pool, at first, you need to make a homemade pool vacuum. Luckily, the process of making a homemade vacuuming system for the pool isn’t stringent.

At first, join the telescopic pole with one end of the garden hose. You can use a rope to bind the garden hose end with the bar. The telescopic pole allows you to move the hose through the pool water quickly. Then connect the other side of the telescopic pole with a vacuuming head.

Step 2:

Once you are ready with the adapter, you would ardently want to fix the draining spot. Once you have clinched the draining spot, you should place the other end of the hose adapter there.

Step 3:

Now you will need to create a vacuum within the garden hose to start the siphoning process. If you are using a complete hose, submerge the telescopic end in the water thoroughly.

Then turn off the filters in the pool. Finally, remove the clamp for mounting from the water source. Once you pull the faucet, it will disperse the air and create a vacuum inside.

Then lower the garden hose in the above ground pool water. Once sank correctly, the water will flow through the hose and drain in the desired location. However, there might be 2 inches to 3 inches of water still left in the pool.

You can use a wet vacuum or trench to drip off the last few inches of water from the pool. Then use a sponge to remove the algae from the pool bottom manually.

How to Clean Dirt from Bottom of Pool

Sometimes, the bottom of the pool may get filled up with dirt. Then it would be best if you cleaned the land from the bottom.

You can use a garden hose and pole to remove the majority of the debris from the pool surface. But, when it comes to removing dirt from the pool bottom, you need to drain the pool first wholly. For this, create a trench or use a wet vacuum.

Once you have ardently removed all the water from the pool, you can use a sponge to remove the dirt. Also, you can use a mop to remove the dirt without bending your back. When you use the mop to remove the soil, the pool should be clean and ready for your perfect swimming day.

Following a similar pattern, you can know how to clean a pool full of dirt and do the job with ease.

Conclusion

So, here we ardently end our discussion on how to get algae out of the pool without a vacuum. You can opt for several techniques when it comes to removing algae from the pool water. You can use the proper filtration or choose the calcium hypochlorite to get rid of the algae from the pool.

Also, the use of a multipurpose algaecide works best to remove yellow, green, and blue algae from the pool water. The algaecide is an inexpensive solution and also cleans the pool entirely. Moreover, it disinfects the pool water, which is a bonus.

Jack Dawson

Jack Dawson

Author

Hi, I’m Jack Dawson; the founder of CLEANING FOR EVERYONE. I have been working in a cleaning appliances store for more than three years. I’ve launched this website to provide honest and unbiased information about cleanliness. So, if you’re the one who doesn’t know much about cleaning your house, garden, garage, and has a little bit idea about cleaning products; I believe this blog will be helpful for you.

Leave a Comment