How to Clean Brake Fluid off Garage Floor – DIY Solutions

Maintaining a clean garage is a chore, especially if you handle your car maintenance there. Even if you have the best garage in the world, a neglected floor is still a problem. Your vehicle’s brake fluid can make a huge mess on your garage floor.

It is always possible to remove brake fluid stains, whether you have a concrete or epoxy floor. The best approach to remove these stains will often differ from one floor to the next. Regardless, they are an eyesore for anyone who prefers to keep their garage floor clear of fluid stains.

It’s ideal to clean up the oil as soon as possible, but you’re not out of luck if you don’t get to it immediately. As a result, we’ll go through some of the finest ways to get brake fluid stains out of your garage floor.

Cleaning your garage floor with a baking soda and water mix helps release dirt and fluid and keeps it free of brake fluid. For an all cleanser, combine a half-cup baking soda with one gallon of warm water. You may also prepare a paste out of baking soda and a few drops of liquid soap and brush light stains with it.

Concrete Floor Scrubbing

Prepare a Cleaning Solution 

Combine the ingredients in a mixing bowl. You’ll need a warm, soapy cleaning solution no matter how you clean your garage floor. Degreasing solutions can be purchased at a hardware store, an auto store, or even a supermarket store. Mix the appropriate amount of cleaning solution with warm water in a bucket according to the label’s recommendations.

· You can also use a laundry detergent that is powdered. 1 gallon (3.8 L) warm water + 1/3 cup (58 g) detergent.

Scrub the Entire Garage Floor

A deck brush or a push broom with stiff bristles can be used to clean lightly dirty floors. On the floor, pour the cleaning solution. Allow it to sit for 10 to 15 minutes to absorb the dirt and oil. When the timer goes off, scrub the floor with your brush, working across the entire surface. After you’ve completed scrubbing, use a hose to rinse the floor. Allow time for the floor to dry.

· As you clean, keep the garage door open. Outside, you can push the water out of the entrance with a broom. This will aid in the drying process.

· You might want to start cleaning far away from the door and work your way closer as you go. You’ll be right next to the door once you’ve finished scrubbing.

Use a Power Washer

You should use a power washer if your garage floor is extremely dirty or has not been cleaned in a long time. These can be rented from a hardware store. Wait 15 minutes after applying the cleaning solution to the floor. Turn on the power washer and squirt down the floor, moving the nozzle across the floor in broad strokes.

· Keep spreading the spray around the floor; if it sits in one location for too long, it will scrape your floor.

· When using a power washer, keep the garage doors open to allow the water to drain.

Run a Buffer Over the Floor

A floor buffer can be rented from a hardware store. This will scrub your garage floor more effectively than you can do by yourself. Clean the floor with the soapy cleaning solution. Switch on the buffer and move it across the floor. Using a high-pressure hose, rinse thoroughly. After that, let the floor dry.

· It might be easier if the floor is divided into portions. One part of the floor at a time should be cleaned.

· A buffer with a nylon scrub head can be rented. These work best on concrete flooring.

Use of a Wet Vacuum Cleaner

To clean the fluids from the garage floor, there are wet/liquid/industrial vacuum cleaners for the garage. If you have trouble keeping your concrete floor clean, this will make it more stain-resistant and maintenance-friendly. Furthermore, because cleaning a garage can take an entire day, this will save you a significant amount of time in cleaning.

Warm, soapy water has a lot of power when it comes to keeping your floors clean and removing minor fluid stains. In a gallon of warm water, dissolve one-third cup powdered laundry detergent and scrub with a nylon-bristle brush. Always rinse your garage floor with your power jet wand after cleaning it. The power jet wand is ideal for this task because it produces a forceful stream that makes rinsing quick and simple.

On the contrary, Epoxy is the most durable and protective coating available. It is available in a variety of hues, though less than paint. If your garage floor is epoxy, you’re in luck. It’s a simple matter of scattering color chips throughout the floor’s surface and sealing it with a clear finish to create a long-lasting, oil-resistant floor that wipes clean effortlessly. Cleaning an epoxy floor is less of a hassle. However, Cleaning the floor should be done on a regular basis for the best benefit.

A man pouring brake fluid in his car

How to Clean Brake Fluid off Garage Floor

Clean Up Spills

If you spill oil or similar liquid on your garage floor, clean it up as soon as possible. These liquids can settle into the floor, making cleanup more difficult. Mop up the mess with paper towels or reusable rags, then throw them away or wash them when you’re done.

Use Lemon Juice or Vinegar

If rust stains appear on a concrete floor, apply lemon juice or vinegar to the stain. Make sure there’s enough to cover the stain. Wait 5 minutes before adding a second dose. Scrub the stain from the floor with a scrub brush with strong bristles.

· If that doesn’t work, try the same procedure with a stronger acid or rust remover from the store.

· Mix ten parts water to one part muriatic acid for extremely difficult rust stains. Apply on the stain and wait five minutes before scrubbing it away.

· Acids like vinegar should not be used on epoxy floors.

Use Cat Litter

If you have a crusted oil stain or oil residue leftover from a spill, look for clay-based cat litter. Apply this to the stain. Allow the litter to soak in the oil for a few hours or overnight. When you’re done, sweep it up.

· If the oil has not been entirely absorbed by the kitty litter after a day, replace it with fresh litter and wait another day. This process can take many days in the case of major oil spills.

Use a Grease Remover

You can buy an oil and grease remover to get rid of stains like this. Stick to the label’s directions. In most cases, you’ll apply the solution to the stain and then wait for it to dry. It normally takes a few hours to do this task. It can be swept up once it has dried.

· Grease removers are commonly found in hardware stores.

Scrub Stubborn Spots

A stiff scrub brush, a box of powdered detergent, and a bucket of warm water are all you’ll need. Cover the stain with the detergent until it is completely covered. Scrub the stain vigorously with the brush dipped in water until it is gone. When you’re done, use rags or paper towels to wipe up as much detergent as you can, then let it dry.

The difficulty with concrete floors is that they are porous and absorb oil and other liquids like a sponge. Oil will soak into the garage floor if left to sit for a period, frustrating even the most determined attempts to remove it. On the other hand, the epoxy floors are relatively easy to clean.


Brake fluid spills are expected to happen in a garage because it is a working room. Clean up existing stains using a little brush, sponge and deal with new spills as soon as possible. It’s easier to maintain your concrete garage floor clean if you do it a little at a time.

The use of a wet vacuum cleaner can save your life. The following features are commonly seen in this type of model. It’s a steam-based cleaning system. Microfibre pads are available in a range of modes and may all be machine cleaned. There are a number of different types of flooring to choose from.

However, Whatever vacuum you choose to clean your garage floors, make sure it is one that serves the purpose of cleaning while not taking up too much of your time. That is how to clean brake fluids off the garage floor.

Leave a Comment